D-31
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Appendix D CSUtil Database Utility
User-Defined RADIUS Vendors and VSA Sets
Note We recommend that you archive RADIUS vendor/VSA import files.
During upgrades, the Utils directory, where CSUtil.exe is located, is
replaced, including all its contents. Backing up RADIUS vendor/VSA
import files ensures that you can recover your custom RADIUS vendors
and VSAs after reinstallation or upgrading to a later release.
Deleting a Custom RADIUS Vendor and VSA Set
You can use the -delUDV option to delete a custom RADIUS vendor from
Cisco Secure ACS.
Note While CSUtil.exe deletes a custom RADIUS vendor from Cisco Secure ACS, all
Cisco Secure ACS services are automatically stopped and restarted. No users are
authenticated while this process is occurring.
Before You Begin
Verify that, in the Network Configuration section of the Cisco Secure ACS HTML
interface, no AAA client uses the RADIUS vendor. For more information about
configuring AAA clients, see AAA Client Configuration, page 4-11.
Verify that your RADIUS accounting log does not contain attributes from the
RADIUS vendor you want to delete. For more information about configuring your
RADIUS accounting log, see Accounting Logs, page 11-6.
To delete a custom RADIUS vendor and VSA set from Cisco Secure ACS, follow
these steps:
Step 1 On the computer running Cisco Secure ACS, open an MS DOS command prompt
and change directories to the directory containing CSUtil.exe. For more
information about the location of CSUtil.exe, see Location of CSUtil.exe and
Related Files, page D-2.
To Next Page
Loading...
Need help?
General