Cisco 3.3 User Manual

F-19
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Appendix F RDBMS Synchronization Import Definitions
Action Codes
Action Codes for Modifying TACACS+ and RADIUS Group and
User Settings
Table F-5 lists the action codes for creating, modifying, and deleting TACACS+
and RADIUS settings for Cisco Secure ACS groups and users. In the event that
Cisco Secure ACS has conflicting user and group settings, user settings always
override group settings.
Transactions using these codes affect the configuration displayed in the User
Setup and Group Setup sections of the HTML interface. For more information
about the User Setup section, see Chapter 7, “User Management”. For more
information about the Group Setup section, see Chapter 6, “User Group
Management”.
Table F-5 Action Codes for Modifying TACACS+ and RADIUS Group and User Settings
Action
Code Name Required Description
161 DEL_RADIUS_ATTR UN|GN,
VN,
Optionally
V2, V3
Deletes the named RADIUS attribute for the group or
user, where:
• VN = “Vendor-Specific”
• V2 = IETF vendor ID
• V3 = VSA attribute ID
For example, to specify the Cisco IOS/PIX vendor ID
and the Cisco AV Pair:
VN = "Vendor-Specific"
V2 = "9"
V3 = "1"

Cisco 3.3 Specifications

General

Brand	Cisco
Model	3.3
Category	Software
Language	English