Cisco 3.3 User Manual

Appendix F RDBMS Synchronization Import Definitions
Action Codes
F-18
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
150 SET_STATIC_IP UN, V1, V2 Configures the (TACACS+ and RADIUS) IP
address assignment for this user.
V1 holds the IP address in the following format:
xxx.xxx.xxx.xxx
V2 should be one of the following:
• ALLOC_METHOD_STATIC—The IP
address in V1 is assigned to the user in the
format xxx.xxx.xxx.xxx.
• ALLOC_METHOD_NAS_POOL—The
IP pool named in V1 (configured on the
AAA client) will be assigned to the user.
• ALLOC_METHOD_AAA_POOL—The
IP pool named in V1 (configured on the
AAA server) will be assigned to the user.
• ALLOC_METHOD_CLIENT—The
dial-in client will assign its own IP address.
• ALLOC_METHOD_AS_GROUP—The
IP address assignment configured for the
group will be used.
151 SET_CALLBACK_NO UN|GN, V1 Sets the callback number for this user or group
(TACACS+ and RADIUS). V1 should be one of
the following:
• Callback number—The phone number the
AAA client is to call back.
• none—No callback is allowed.
• roaming—The dial-up client determines the
callback number.
• as group—Use the callback string or
method defined by the group.
Table F-4 Action Codes for Initializing and Modifying Access Filters (continued)
Action
Code Name Required Description

Cisco 3.3 Specifications

General

Brand	Cisco
Model	3.3
Category	Software
Language	English