Cisco 3.3 User Manual

Appendix F RDBMS Synchronization Import Definitions
Action Codes
F-8
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
105 SET_T+_ENABLE_
PASS
UN, VN,
V1, V2,
V3
Sets the TACACS+ enable password (V1) (32
characters maximum) and Max Privilege level (V2)
(0-15).
The enable type (V3) should be one of the following:
• ENABLE_LEVEL_AS_GROUP—Max privilege
taken from group setting.
• ENABLE_LEVEL_NONE—No T+ enable
configured.
• ENABLE_LEVEL_STATIC—Value set in V2
used during enable level check.
You can use VN to link the enable password to an
external authenticator, as per action 108
SET_PASS_TYPE.
106 SET_GROUP UN, GN Sets the Cisco Secure ACS group assignment of the
user.
Table F-3 User Creation and Modification Action Codes (continued)
Action
Code Name Required Description

Cisco 3.3 Specifications

General

Brand	Cisco
Model	3.3
Category	Software
Language	English