Cisco 3.3 - Page 813

F-27
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Appendix F RDBMS Synchronization Import Definitions
Action Codes
221 SET_NAS_FLAG VN, V1 Sets one of the per-AAA client flags (V1) for the
named AAA client (VN). Use the action once for each
flag required. Valid values for per-AAA client flags
are as follows:
• FLAG_SINGLE_CONNECT
• FLAG_LOG_KEEP_ALIVE
• FLAG_LOG_TUNNELS
222 DEL_HOST VN Deletes the named AAA client (VN).
223 ADD_NAS_BY_IETF_
CODE
VN,V1, V2,
V3
Adds a new AAA client (named in VN) with an IP
address (V1), shared secret key (V2), and the
enterprise code for the vendor (V3).
230 ADD_AAA_SERVER VN, V1, V2 Adds a new AAA server named (VN) with IP address
(V1), shared secret key (V2).
231 SET_AAA_TYPE VN, V1 Sets the AAA server type for server (VN) to value in
V1, which should be one of the following:
• TYPE_ACS
• TYPE_TACACS
• TYPE_RADIUS
• The default is AAA_SERVER_TYPE_ACS
232 SET_AAA_FLAG VN, V1 Sets one of the per-AAA client flags (V1) for the
named AAA server (VN):
• FLAG_LOG_KEEP_ALIVE
• FLAG_LOG_TUNNELS
Use the action once for each flag required.
Table F-6 Action Codes for Modifying Network Configuration (continued)
Action
Code Name Required Description