2-32
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
OL-12191-01
Chapter 2 Message and Recovery Procedures
EXPRESS_SETUP Messages
EXPRESS_SETUP Messages
This section contains the Express Setup messages that appear when you use a 10/100/1000 or the
Ethernet management port to connect to the PC. For Express Setup with the Ethernet management port,
see the
CLS_ACC Messages section.
Error Message EXPRESS_SETUP-3-UNABLE_TO_RESET_CONFIG: [chars].
Explanation The system is unable to reset the configuration. [chars] is a text string that explains why
the reset failed. For example,
error renaming config file, error removing config file, or
error removing private config file.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
“Error Message Traceback Reports” section on page 1-6.
Error Message EXPRESS_SETUP-6-CONFIG_IS_RESET: [chars].
Explanation The configuration is reset. [chars] is a text message that clarifies the reset event, such
as
The configuration is reset and the system will now reboot.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
“Error Message Traceback Reports” section on page 1-6.
Error Message EXPRESS_SETUP-6-MODE_ENTERED.
Explanation The Express Setup mode is active.
Recommended Action No action is required.
Error Message EXPRESS_SETUP-6-MODE_EXITED.
Explanation The Express Setup mode is no longer active.
Recommended Action No action is required.
To Next Page
Loading...
Need help?
General