Cisco 3110 - Page 68

2-52
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
OL-12191-01
Chapter 2 Message and Recovery Procedures
PLATFORM _IPC Messages
Error Message PLATFORM_IPC-3-MAX_LENGTH_EXCEEDED: [chars].
Note This message applies only to the Catalyst Switch Module 3110.
Explanation An internal IPC application error occurred when an IPC message was sent that exceeded
the maximum length. [chars] describes the error message.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
“Error Message Traceback Reports” section on page 1-6.
Error Message PLATFORM_IPC-3-MEMBER: [chars].
Note This message applies only to the Catalyst Switch Module 3110.
Explanation There has been an IPC failure on a stack member switch. [chars] describes the error
message.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
“Error Message Traceback Reports” section on page 1-6.
Error Message PLATFORM_IPC-3-STACK_EVENT: [chars].
Note This message applies only to the Catalyst Switch Module 3110.
Explanation There has been an IPC failure in the stack. [chars] describes the error message.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
“Error Message Traceback Reports” section on page 1-6.