9-24
Cisco TelePresence System 3200
OL-14521-01
Chapter 9 Routing Power and Signal Cables
Power Requirements for the Cisco TelePresence 3200
Step 18 (Optional) If your installation uses an optional external display or a document camera, install and route
the cabling.
Note Use the HD Video cable, part number 37-1078-01, to connect the external display.
Note When you use the audio/video extension unit as a video splitter, connect port 1 of the “Video in”
connection from the codec, and port 4 of the “Video out” connection to the projector.
To Next Page
Loading...
