12-10
Cisco TelePresence System 3200
OL-14521-01
Chapter 12 Field-Replaceable Unit Guide
Replacing a Plasma Display—Part Number CTS-DISP-65-GEN4=
Figure 12-1 Removing the Display Mounting Bracket
Step 7 Move the Plasma display out of the work area to a temporary location safe from potential damage.
Step 8 Unpack the new display.
Note Take care to minimize damaging the packaging material so it may be reused to package the old
display screen.
Step 9 Attach the display mounting bracket you removed from the original display using six screws, and remove
the display handles.
To Next Page
Loading...
