Contents
11
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Configuring Layer 3 Interfaces 1
Layer 3 Interface Configuration Guidelines and Restrictions 2
Configuring Subinterfaces on Layer 3 Interfaces 2
Configuring IPv4 Routing and Addresses 4
Configuring IPX Routing and Network Numbers 8
Configuring AppleTalk Routing, Cable Ranges, and Zones 9
Configuring Other Protocols on Layer 3 Interfaces 10
Configuring UDE and UDLR 1
Understanding UDE and UDLR 1
UDE and UDLR Overview 1
Supported Hardware 2
Understanding UDE 2
Understanding UDLR 3
Configuring UDE and UDLR 3
Configuring UDE 3
Configuring UDLR 6
Configuring PFC3BXL and PFC3B Mode Multiprotocol Label Switching 1
PFC3BXL and PFC3B Mode MPLS Label Switching 1
Understanding MPLS 2
Understanding PFC3BXL and PFC3B Mode MPLS Label Switching 2
Supported Hardware Features 5
Supported Cisco IOS Features 5
MPLS Guidelines and Restrictions 7
PFC3BXL and PFC3B Mode MPLS Supported Commands 7
Configuring MPLS 8
MPLS Per-Label Load Balancing 8
MPLS Configuration Examples 8
PFC3BXL or PFC3B Mode VPN Switching 10
PFC3BXL or PFC3B Mode VPN Switching Operation 10
MPLS VPN Guidelines and Restrictions 11
PFC3BXL or PFC3B Mode MPLS VPN Supported Commands 11
Configuring MPLS VPN 11
MPLS VPN Sample Configuration 12
Any Transport over MPLS 13
AToM Load Balancing 14