Contents
12
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Understanding EoMPLS 14
EoMPLS Guidelines and Restrictions 14
Configuring EoMPLS 16
Configuring IPv4 Multicast VPN Support 1
Understanding How MVPN Works 1
MVPN Overview 2
Multicast Routing and Forwarding and Multicast Domains 2
Multicast Distribution Trees 2
Multicast Tunnel Interfaces 5
PE Router Routing Table Support for MVPN 6
Multicast Distributed Switching Support 6
Hardware-Assisted IPv4 Multicast 6
MVPN Configuration Guidelines and Restrictions 7
Configuring MVPN 8
Forcing Ingress Multicast Replication Mode (Optional) 8
Configuring a Multicast VPN Routing and Forwarding Instance 9
Configuring Multicast VRF Routing 15
Configuring Interfaces for Multicast Routing to Support MVPN 20
Sample Configurations for MVPN 22
MVPN Configuration with Default MDTs Only 22
MVPN Configuration with Default and Data MDTs 24
Configuring IP Unicast Layer 3 Switching 1
Understanding How Layer 3 Switching Works 2
Understanding Hardware Layer 3 Switching 2
Understanding Layer 3-Switched Packet Rewrite 2
Default Hardware Layer 3 Switching Configuration 4
Configuration Guidelines and Restrictions 4
Configuring Hardware Layer 3 Switching 5
Displaying Hardware Layer 3 Switching Statistics 6
Configuring IPv6 Multicast PFC3 and DFC3 Layer 3 Switching 1
Features that Support IPv6 Multicast 2
IPv6 Multicast Guidelines and Restrictions 2
New or Changed IPv6 Multicast Commands 3
Configuring IPv6 Multicast Layer 3 Switching 3
To Next Page
Loading...
