Cisco 7604 User Manual

Contents
13
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Using show Commands to Verify IPv6 Multicast Layer 3 Switching 3
Verifying MFIB Clients 4
Displaying the Switching Capability 5
Verifying the (S,G) Forwarding Capability 5
Verifying the (*,G) Forwarding Capability 5
Verifying the Subnet Entry Support Status 5
Verifying the Current Replication Mode 5
Displaying the Replication Mode Auto Detection Status 6
Displaying the Replication Mode Capabilities 6
Displaying Subnet Entries 6
Displaying the IPv6 Multicast Summary 6
Displaying the NetFlow Hardware Forwarding Count 7
Displaying the FIB Hardware Bridging and Drop Counts 7
Displaying the Shared and Well-Known Hardware Adjacency Counters 8
Configuring IPv4 Multicast Layer 3 Switching 1
Understanding How IPv4 Multicast Layer 3 Switching Works 1
IPv4 Multicast Layer 3 Switching Overview 2
Multicast Layer 3 Switching Cache 2
Layer 3-Switched Multicast Packet Rewrite 3
Partially and Completely Switched Flows 4
Non-RPF Traffic Processing 5
Multicast Boundary 7
Understanding How IPv4 Bidirectional PIM Works 7
Default IPv4 Multicast Layer 3 Switching Configuration 7
IPv4 Multicast Layer 3 Switching Configuration Guidelines and Restrictions 8
Restrictions 8
Unsupported Features 9
Configuring IPv4 Multicast Layer 3 Switching 9
Source-Specific Multicast with IGMPv3, IGMP v3lite, and URD 10
Enabling IPv4 Multicast Routing Globally 10
Enabling IPv4 PIM on Layer 3 Interfaces 10
Enabling IP Multicast Layer 3 Switching Globally 11
Enabling IP Multicast Layer 3 Switching on Layer 3 Interfaces 11
Configuring the Replication Mode 12
Enabling Local Egress Replication 14
Configuring the Layer 3 Switching Global Threshold 15
Enabling Installation of Directly Connected Subnets 15

Cisco 7604 Specifications

General

Brand	Cisco
Model	7604
Category	Network Router
Language	English