Cisco 7800 Series Administration Guide

New and Changed for Firmware Release 11.2(1)
New or Changed SectionsRevisions
Enable User Access to the Phone Interface Menus,
on page 82
System Configuration, on page 225
Updated the topics to support LCD screen does not
honor "ro" and "na" attribute
Configure the SIP Transport, on page 189Added a new topic to support NAPTR
Telephony Features for Cisco IP Phone, on page 151
SIP Settings, on page 280
Updated the topics to support NAPTR
Configure a Privacy Header, on page 190.Added a new topic to support SIP privacy header
SIP Settings, on page 280Updated the topic to support SIP privacy header
Block Non-Proxy SIP Messages to a Phone, on page
190
Added a new topic to support blocking of SIP message
from a non-proxy device
System Configuration, on page 225Updated the topic to support blocking of SIP message
from a non-proxy device
Peer Firmware Sharing, on page 191
Enable Peer Firmware Sharing, on page 192
Added a new topic to support Peer Firmware Sharing
Telephony Features for Cisco IP Phone, on page 151
Firmware Upgrade, on page 251
Updated the topic to support Peer Firmware Sharing
Configuration Profile, on page 242Updated the topic to support profile account
Add Ignore Programmable Soft Key to Silence an
Incoming Call, on page 193
Added new topic to support call silence
Programmable Softkeys, on page 174
Telephony Features for Cisco IP Phone, on page 151
Updated the topics to support call silence
Enable BroadWorks Anywhere, on page 194
XSI Line Service, on page 289
Added new topics to support XSI BroadWorks
Anywhere
Sync the Block Caller ID Feature with the Phone and
the BroadWords XSI Server, on page 195
XSI Line Service, on page 289
Added new topics to support XSI caller ID blocking
Enable Viewing BroadWorks XSI Call Logs on a Line
, on page 195
Added new topics to support XSI call logs
XSI Phone Service, on page 270
Telephony Features for Cisco IP Phone, on page 151
Updated the topics to support XSI call logs
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
3
New and Changed Information
New and Changed for Firmware Release 11.2(1)

Cisco 7800 Series Specifications

General

Wireless	No
Video Support	No
PoE	Yes, 802.3af/at
Audio Codec Support	G.711, G.722, G.729, iLBC
Network Protocols	SIP, SDP, IPv4, IPv6, UDP, TCP, DNS, TFTP, HTTP, HTTPS, DHCP
Security Features	802.1X, TLS, SRTP
Power Options	PoE
Headset Port	3.5mm
Buttons	Line keys, navigation cluster, softkeys, mute, speakerphone, headset, volume control
Bluetooth	No
Ethernet Switch	Yes, 2-port 10/100/1000
USB Port	Yes, for headset (7875)