E-5
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SIP)
OL-15499-01
APPENDIX
E
Basic Phone Administration Steps
This appendix provides minimum, basic configuration steps for you to do the following:
• Add a new user to Cisco Unified Communications Manager Administration
• Configure a new phone for that user
• Associate that user to that phone
• Complete other basic end-user configuration tasks
The procedures provide one method for performing these tasks and are not the only way to perform these
tasks. They are a streamlined approach to get a new user and corresponding phone running on the system.
These procedures are designed to be used on a mature Cisco Unified Communications Manager system
where calling search spaces, partitions, and other complicated configuration have already been done and
are in place for existing users.
This section contains these topics:
• Example User Information for these Procedures, page E-5
• Adding a User to Cisco Unified Communications Manager, page E-6
• Configuring the Phone, page E-7
• Performing Final End User Configuration Steps, page E-11
Example User Information for these Procedures
In the procedures that follow, example are given when possible to illustrate some of the steps. Sample
user and phone information used throughout these procedures includes:
• User’s Name: John Doe
• User ID: johndoe
• Phone model: 7961G
• Protocol: SIP
• MAC address listed on phone: 00127F576611
• Five-digit internal telephone number: 26640
To Next Page
Loading...
Need help?
General
Weight and Dimensions
