CHAPTER
5-1
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SIP)
OL-15499-01
5
Configuring Features, Templates, Services, and
Users
After you install Cisco Unified IP Phones in your network, configure their network settings, and add
them to Cisco
Unified Communications Manager, you must then use the Cisco Unified Communications
Manager Administration application to configure some telephony features, optionally modify phone
templates, set up services, and assign users.
This chapter provides an overview of these configuration and set up procedures. Cisco Unified
Communications Manager documentation provides detailed instructions for these procedures.
This chapter also explains how you control access to options on the Cisco Unified Communications
Manager User Options web pages.
You configure most telephony features on the phone itself. For additional information, refer to Cisco
Unified IP Phone 7960G and 7940G Phone Guide for Cisco Unified
Communications Manager 7.0
(SIP).
For suggestions about how to provide users with information about features, and what information to
provide, see
Appendix A, “Providing Information to Users Via a Website.”
For information about setting up phones in non-English environments, see Appendix A, “Providing
Information to Users Via a Website.”
This chapter includes following topics:
• Telephony Features Available for the Cisco Unified IP Phone, page 5-2
• Configuring Corporate and Personal Directories, page 5-4
• Modifying Phone Button Templates, page 5-6
• Setting Up Services, page 5-6
• Adding Users to Cisco Unified Communications Manager, page 5-7
• Managing the User Options Web Pages, page 5-7
To Next Page
Loading...
Need help?
General
Weight and Dimensions
