5-7
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SIP)
OL-15499-01
Chapter 5 Configuring Features, Templates, Services, and Users
Adding Users to Cisco Unified Communications Manager
After you configure these services, verify that your users have access to the Cisco
Unified
Communications Manager IP Phone Options web-based application, from which they can select
and subscribe to configured services. See the
“How Users Obtain Support for the Cisco Unified IP
Phone” section on page A-1 for a summary of the information that you must provide to end users.
Adding Users to Cisco Unified Communications Manager
Adding users to Cisco Unified Communications Manager allows you to display and maintain
information about users and allows each user to perform these tasks:
• Access the corporate directory and other customized directories from a Cisco Unified IP Phone
• Subscribe to services that are accessible from a Cisco Unified IP Phone
You can add users to Cisco Unified Communications Manager using either of these methods:
• To add users individually, choose User Management > End User from
Cisco
Unified Communications Manager Administration.
Refer to Cisco Unified Communications Manager Administration Guide for more information about
adding users. Refer to Cisco Unified Communications Manager System Guide for details about user
information.
• To add users in batches, use the Bulk Administration Tool. This method also enables you to set an
identical default password for all users.
Refer to Cisco Unified Communications Manager Bulk Administration Guide for details.
Managing the User Options Web Pages
From the User Options web page, users can customize and control several phone features and settings,
these include Incoming Call Forwarding, Line Text Label, and IP Phone Services. For detailed
information about the User Options web pages, refer to Cisco Unified IP Phone 7960G and 7940G
Phone Guide.
Giving Users Access to the User Options Web Pages
Before a user can access the User Options web pages, you must use Cisco Unified Communications
Manager Administration to add the user to a standard Cisco Unified Communications Manager end user
group: choose User Management > User Groups.
For additional information, refer to Cisco Unified Communications Manager Administration Guide,
“End User Configuration” section.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
