Cisco 7940G

3-9
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SIP)
OL-15499-01
Chapter 3 Setting Up the Cisco Unified IP Phone
Configuring Startup Network Settings
Configuring Startup Network Settings
If you are not using DHCP in your network, you must configure these network settings on the
Cisco
Unified IP Phone after installing the phone on the network:
• IP address
• IP subnet mask
• Default gateway IP address
• Domain name
• DNS server IP address
• TFTP server IP address
Collect this information and see Chapter 4, “Configuring Settings on the Cisco Unified IP Phone.”
Configuring Security on the Cisco Unified IP Phone
The security features protects against several threats, including threats to the identity of the phone and
to data. These features establish and maintain authenticated and encrypted communication streams
between the phone and the Cisco
Unified Communications Manager server, digitally sign files before
they are delivered, and provide other security functionality.
For more information about the security features, see the “Understanding Security Features for Cisco
Unified IP Phones” section on page 1-7. Also, refer to Cisco Unified Communications Manager Security
Guide.