Cisco 7940G Administration Guide

5-5
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SIP)
OL-15499-01
Chapter 5 Configuring Features, Templates, Services, and Users
Configuring Corporate and Personal Directories
• Personal Directory—Allows a user to store a set of personal numbers.
To support this feature, you must provide the user with software to configure the personal directory.
See the
“Configuring Personal Directory” section on page 5-5 for more information.
Configuring Corporate Directories
Cisco Unified Communications Manager uses a Lightweight Directory Access Protocol (LDAP)
directory to store authentication and authorization information about users of Cisco
Unified
Communications Manager applications that interface with Cisco
Unified Communications Manager.
Authentication establishes the users’ rights to access the system. Authorization identifies the telephony
resources that a user is permitted to use, such as a specific telephone extension.
To install and set up these features, refer to the Cisco Unified Communications Manager Administration
Guide, LDAP System Configuration, LDAP Directory Configuration, and LDAP Authentication
Configuration chapters.
After the LDAP directory configuration completes, users can use the Corporate Directory service on
your Cisco
Unified IP Phone 7960G or 7940G to look up users in the corporate directory.
Configuring Personal Directory
Personal Directory consists of the following features:
• Personal Address Book (PAB)
• Personal Fast Dials (Fast Dials)
• Address Book Synchronization Tool (TABSynch)
Users can access Personal Directory features by these methods:
• From a web browser—Users can access the PAB and Fast Dials features from the Cisco Unified
Communications Manager User Options web pages
• From the Cisco Unified IP Phone—Users can choose Directories > Personal Directory to access
the PAB and Fast Dials features from their phones
• From a Microsoft Windows application—Users can use the TABSynch tool to synchronize their
PABs with Microsoft Windows Address Book (WAB). Customers who want to use the Microsoft
Outlook Address Book (OAB) should begin by importing the data from the OAB into the Windows
Address Book (WAB). TabSync can then be used to synchronize the WAB with Personal Directory.
To configure Personal Directory from a web browsers, users must access their User Options web pages.
You must provide users with a URL and login information.
To synchronize with Microsoft Outlook, users must install the TABSynch utility, provided by you. To
obtain the TABSynch software to distribute to users, choose Application > Plugins from Cisco
Unified
Communications Manager Administration, then locate and click Cisco Unified IP Phone Address Book
Synchronizer.

Cisco 7940G Specifications

General

Keypad number of keys	12
Touchscreen	-
Speakerphone	Yes
Voice codecs	G.711, G.729a
Bluetooth	No
Supported network protocols	DHCP, SCCP, SIP, MGCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3 FCC 68 (CFR47) HAC IC CS-03
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g