Cisco 7940G

Contents
4
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SIP)
OL-15499-01
Obtaining Additional Information about Power 2-4
Understanding Phone Configuration Files 2-5
Understanding the Phone Startup Process 2-6
Adding Phones to the Cisco Unified Communications Manager Database 2-7
Adding Phones with Auto-Registration 2-8
Adding Phones with Cisco Unified Communications Manager Administration 2-9
Adding Phones with BAT 2-9
Using Cisco Unified IP Phones with Different Protocols 2-9
Converting a New Phone from SCCP to SIP 2-10
Converting an In-Use Phone from SCCP to SIP 2-10
Converting an In-Use Phone from SIP to SCCP 2-10
Deploying a Phone in an SCCP and SIP Environment 2-11
Determining the MAC Address for a Cisco Unified IP Phone 2-11
CHAPTER 3 Setting Up the Cisco Unified IP Phone 3-1
Before You Begin 3-1
Network Requirements 3-1
Cisco Unified Communications Manager Configuration 3-2
Understanding the Cisco Unified IP Phone Components 3-2
Network and Access Ports 3-2
Handset 3-3
Speakerphone 3-3
Headset 3-3
Audio Quality Subjective to the User 3-3
Connecting a Headset 3-4
Disabling a Headset 3-4
Using External Devices with Your Cisco Unified IP Phone 3-4
Installing the Cisco Unified IP Phone 3-5
Adjusting the Placement of the Cisco Unified IP Phone 3-7
Adjusting Cisco Unified IP Phone Placement on the Desktop 3-7
Mounting the Phone to the Wall 3-7
Verifying the Phone Startup Process 3-8
Configuring Startup Network Settings 3-9
Configuring Security on the Cisco Unified IP Phone 3-9
CHAPTER 4 Configuring Settings on the Cisco Unified IP Phone 4-1
Configuration Menus on the Cisco Unified IP Phone 4-1
Displaying a Configuration Menu 4-2