Cisco 7975G - Page 135

6-9
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12642-01
Chapter 6 Customizing the Cisco Unified IP Phone
Automatically Disabling the Cisco Unified IP Phone Touchscreen
Display Idle
Timeout
Length of time that the phone is idle before the display
turns off. Applies only when the display was off as
scheduled and was turned on by an end-user (by pressing a
button on the phone, touching the touchscreen, or lifting
the handset).
Enter the value in this field in the format hours:minutes.
For example, to turn the display off when the phone is idle
for 1 hour and 30 minutes after an end-user turns the
display on, enter 1:30.
The default value is 0:30.
Display On If
Incoming Call
Disable/enable automatic illumination of the LCD screen
when a call is received.
Default: Disabled
Table 6-1 Display On and Off Configuration Fields (continued)
Field Description