EasyManuals Logo

Cisco 7975G Administration Guide

Cisco 7975G
217 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
4-23
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12642-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Recording Tone
Local Volume
Indicates the loudness setting for the
beep tone that is received by the party
whose phone has the Recording Tone
option enabled.
This setting applies for each listening
device (handset, speakerphone,
headset).
Range: 0 percent (no tone) to 100
percent (same level as current volume
setting on the phone).
Default: 100
See also: Recording Tone
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Recording Tone
Remote Volume
Indicates the loudness setting for the
beep tone that the remote party
receives. The remote party is the party
who is on a call with the party whose
phone has the Recording Tone option
enabled.
Range: 0 percent to 100 percent. (0
percent is –66 dBM and 100 percent is
–3 dBM.)
Default: 84 percent (–10dBM)
See also: Recording Tone
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Recording Tone
Duration
Indicates the length of time in
milliseconds that the beep tone plays.
If the value you configure here is less
than one third the interval, then this
value overrides the default provided by
the Network Locale.
Range: 0 to 3000
Note For some Network Locales that
use a complex cadence, this
setting applies only to the first
beep tone.
See also: Recording Tone
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Table 4-12 Media Configuration Menu Options (continued)
Option Description To Change

Table of Contents

Other manuals for Cisco 7975G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7975G and is the answer not in the manual?

Cisco 7975G Specifications

General IconGeneral
Handset typeWired handset
Product typeIP Phone
Product colorGrey, Silver
SpeakerphoneYes
Voice codecsG.711Mu, G.711a, G.722, G.729A, iLBC
Number of melodies24
Aspect ratio4:3
Display diagonal5.6 \
Display resolution320 x 240 pixels
Lines quantity8 lines
Phonebook capacity- entries
Number of VoIP accounts-
Front cameraNo
Security algorithms128-bit AES
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsDHCP, TFTP
Volume controlDigital
Headphone outputs1
Ethernet LAN (RJ-45) ports2
Number of handles included1 pc(s)
AC adapter output voltage48 V
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
CertificationFCC
Weight and Dimensions IconWeight and Dimensions
Depth152.4 mm
Width266.7 mm
Height203.2 mm
Weight1600 g

Related product manuals