EasyManuals Logo

Cisco 8821 User Manual

Cisco 8821
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #103 background imageLoading...
Page #103 background image
DescriptionField
Percentage of time, normalized to 255, in which the
AP sensed the medium was busy, as indicated by the
physical or virtual carrier sense (CS) mechanism.
Channel utilization
Total number of spanning tree algorithms (STAs)
currently associated with this BSS.
Station count
An unsigned integer that specifies the remaining
amount of medium time available through explicit
admission control, in units of 32 microseconds per
second.
Admission capacity
Support for Wi-Fi Multimedia Extensions.WMM supported
Unscheduled Automatic Power Save Delivery
(UAPSD) is supported by the AP. May only be
available if WMM is supported. This feature is critical
to talk time and achieving maximum call density on
the wireless IP phone.
UAPSD supported
CCX-compliant AP supports responding to IP ARP
requests on behalf of the associated station. This
feature is critical to standby time on the wireless IP
phone.
Proxy ARP
Version of CCX if the AP is CCX compliant.CCX version
Information for each Access Category (AC). There
is one set of data for best effort, background, video,
and audio.
Admission controlIf yes, admission control
must be used prior to transmission using the
access parameters specific for this AC.
AIFSNNumber of slots after an SIFS duration
a non-AP STA should defer before invoking a
backoff or starting a transmission.
ECWMinEncodes value of CWmin in an
exponent form to provide the minimum amount
of time in a random backoff.
ECWMaxEncodes value of CWmax in an
exponent form to provide the maximum amount
of time in a random backoff.
TXOpLimitInterval of time in which a
particular quality of service (QoS) station has
the right to initiate
AC: Best effort, AC: Background, AC: Video, and
AC: Audio
Admission control
AIFSN
ECWMin
ECWMax
TXOpLimit
Cisco Wireless IP Phone 8821 and 8821-EX User Guide
93
Troubleshooting
Perform WLAN Diagnostics

Table of Contents

Other manuals for Cisco 8821

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 8821 and is the answer not in the manual?

Cisco 8821 Specifications

General IconGeneral
Wi-FiYes
Ethernet LANNo
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version3.0+HS
Security algorithmsEAP-FAST, EAP-TLS, PEAP, WPA
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11e, IEEE 802.11g, IEEE 802.11n, IEEE 802.11r
USB 2.0 ports quantity1
Voice codecsG.711, G.711a, G.722, G.729, G.729ab, iLBC
Volume controlDigital
Product typeIP mobile phone
Product colorBlack
Input frequency50 - 60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current0.2 A
Display diagonal2.4 \
Display resolution240 x 320 pixels
Frequency band2.412, 2.472, 5.180, 5.240, 5.260, 5.320, 5.500, 5.700, 5.745, 5.825 GHz
Lines quantity- lines
Phonebook capacity- entries
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
SafetyUL 60950-1, CAN/CSA 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950.1, IEC 60529 (IP 67)
Certification● 47 CFR 15 B ● ICES-003 B ● EN 55022 B ● AS/NZS CISPR 22 B ● CISPR 22 B ● VCCI B ● EN 61000-3-2 ● EN 61000-3-3 ● KN 22 B ● EN 55024 ● EN 50082-1 ● EN 61000-6-1 ● EN61000-6-3 ● EN 300386 ● EN 60601-1-2 ● KN
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth17 mm
Width56 mm
Height132 mm
Weight126 g

Related product manuals