EasyManuals Logo

Cisco 8821 User Manual

Cisco 8821
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
c) Press the center of each side of the cover until it clicks in place.
d) Check that the cover is flush with the phone.
Phone Battery Charging
You can charge the battery using any of the following options:
USB cableYou can charge the phone with an AC power adapter or your computer.
Desktop chargerYou can use the phone and charge it at the same time.
MultichargerYou can charge several phones at the same time.
Explosion Hazard: Do not charge the phone battery in a potentially explosive atmosphere. Statement 431Warning
The battery takes about 3 hours to charge in the AC power adapter, desktop charger, or multicharger. It takes
about 6 hours to charge using the USB cable and your computer.
Related Topics
Cisco Wireless IP Phone 8821 and 8821-EX Multi Charger, on page 82
Cisco Wireless IP Phone 8821 and 8821-EX Desktop Charger, on page 79
Spare Battery Charging
If you require longer talk times, you will find it useful to have a spare, charged battery. You can charge a
spare battery in the desktop charger or multicharger.
Explosion Hazard: Do not charge the spare battery in a potentially explosive atmosphere. Statement 431Warning
The spare battery takes about 3 hours to charge in the desktop charger or multicharger.
Related Topics
Cisco Wireless IP Phone 8821 and 8821-EX Multi Charger, on page 82
Cisco Wireless IP Phone 8821 and 8821-EX Desktop Charger, on page 79
Prepare the Power Adapter
The power adapter for your phone is compact. Before you use the power adapter, you have to unfold the
prongs. After you use the adapter, you can fold in the prongs.
The power adapter for your region may also require an additional clip to allow the adapter to be plugged into
the electrical outlet.
Cisco Wireless IP Phone 8821 and 8821-EX User Guide
24
Phone Setup
Phone Battery Charging

Table of Contents

Other manuals for Cisco 8821

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 8821 and is the answer not in the manual?

Cisco 8821 Specifications

General IconGeneral
Wi-FiYes
Ethernet LANNo
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version3.0+HS
Security algorithmsEAP-FAST, EAP-TLS, PEAP, WPA
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11e, IEEE 802.11g, IEEE 802.11n, IEEE 802.11r
USB 2.0 ports quantity1
Voice codecsG.711, G.711a, G.722, G.729, G.729ab, iLBC
Volume controlDigital
Product typeIP mobile phone
Product colorBlack
Input frequency50 - 60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current0.2 A
Display diagonal2.4 \
Display resolution240 x 320 pixels
Frequency band2.412, 2.472, 5.180, 5.240, 5.260, 5.320, 5.500, 5.700, 5.745, 5.825 GHz
Lines quantity- lines
Phonebook capacity- entries
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
SafetyUL 60950-1, CAN/CSA 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950.1, IEC 60529 (IP 67)
Certification● 47 CFR 15 B ● ICES-003 B ● EN 55022 B ● AS/NZS CISPR 22 B ● CISPR 22 B ● VCCI B ● EN 61000-3-2 ● EN 61000-3-3 ● KN 22 B ● EN 55024 ● EN 50082-1 ● EN 61000-6-1 ● EN61000-6-3 ● EN 300386 ● EN 60601-1-2 ● KN
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth17 mm
Width56 mm
Height132 mm
Weight126 g

Related product manuals