!
line con 0
access-class 111 in
line vty 0 4
access-class 111 in
transport input all
!
sntp server 10.0.0.2
sntp broadcast client
end
Configuring Cisco Call Control
Cisco Unified Communications Manager
Cisco Unified Communications Manager offers many different phone, call and security features.
When adding the Cisco IP Phone 8861 or 8865 to the Cisco Unified Communications Manager it must be provisioned using the
Ethernet MAC address as the Wireless LAN MAC is used for Wi-Fi connectivity only.
The Ethernet MAC address of the Cisco IP Phone 8861 or 8865 can be found by navigating to Applications > Administration
settings > Network setup > Ethernet configuration.
Device Pools
When creating a new Cisco IP Phone 8861 or 8865, a Device Pool must be configured.
The device pool defines common settings (e.g. Cisco Unified Communications Manager Group, etc.), roaming sensitive settings
(e.g. Date/Time Group, Region, etc.), local route group settings, device mobility related information settings, and other group
settings.
Device Pools can be used to either group devices per location, per model type, etc.
To Next Page
Loading...
Need help?
General
