Note: The 802.1p tag mappings were changed with the 7.5.102.0 release. 
Prior to the 7.5.102.0 release, Platinum = 6, Gold = 5, Silver = 3, Bronze = 1. 
 
Advanced Settings 
Advanced EAP Settings 
Need to ensure that the advanced EAP settings in the Cisco Wireless LAN Controller are configured per the information below. 
 
To view the EAP configuration on the Cisco Wireless LAN Controller, telnet or SSH to the controller and enter the following 
command. 
 
 (Cisco Controller) >show advanced eap 
 
EAP-Identity-Request Timeout (seconds)........... 30 
EAP-Identity-Request Max Retries................. 2 
EAP Key-Index for Dynamic WEP.................... 0 
EAP Max-Login Ignore Identity Response........... enable 
EAP-Request Timeout (seconds).................... 30 
EAP-Request Max Retries.......................... 2 
EAPOL-Key Timeout (milliseconds)...................... 400