EasyManuals Logo

Cisco 8861 Deployment Guide

Cisco 8861
207 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
Cisco IP Phone 8861 and 8865 Wireless LAN Deployment Guide
62
Dot11-Phone Mode (7920).......................... ap-cac-limit
Wired Protocol................................... 802.1P (Tag=5)
Ensure Voice TSPEC Inactivity Timeout is disabled.
(Cisco Controller) >config 802.11a cac voice tspec-inactivity-timeout ignore
(Cisco Controller) >config 802.11b cac voice tspec-inactivity-timeout ignore
In the Media settings, Unicast Video Redirect and Multicast Direct Enable should be enabled.
RF Profiles
RF Profiles can be created to specify which frequency bands, data rates, RRM settings, etc. a group of access points should use.
It is recommended to have the SSID used by the Cisco IP Phone 8861 and 8865 to be applied to 5 GHz radios only.
RF Profiles are applied to an AP group once created.
When creating an RF Profile, the RF Profile Name and Radio Policy must be defined.
Select 802.11a or 802.11b/g for the Radio Policy.

Table of Contents

Other manuals for Cisco 8861

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 8861 and is the answer not in the manual?

Cisco 8861 Specifications

General IconGeneral
Resolution800 x 480 pixels
AudioWideband audio
Ethernet Ports2 x 10/100/1000
SpeakerphoneFull-duplex
Display5-inch color display
Lines5
PoEYes (802.3af)
ProtocolsSIP, SDP, SRTP
Wi-Fi802.11a/b/g/n/ac
Headset JackYes
CodecsG.711, G.722, G.729, iLBC
USB Port2 x USB 2.0
USB Ports2 x USB 2.0
Supported LanguagesMultiple (English, French, Spanish, etc.)

Related product manuals