Cisco 8861 Deployment Guide

Cisco IP Phone 8861 and 8865 Wireless LAN Deployment Guide
63
On the 802.11 tab, configure the data rates as desired.
Is recommended to enable 12 Mbps as Mandatory and 18 Mbps and higher as Supported; however some environments may
require 6 Mbps to be enabled as a mandatory (basic) rate.
On the RRM tab, the Maximum Power Level Assignment and Minimum Power Level Assignment settings as well as other
DCA, TPC, and Coverage Hole Detection settings can be configured.

Cisco 8861 Specifications

General

Resolution	800 x 480 pixels
Audio	Wideband audio
Ethernet Ports	2 x 10/100/1000
Speakerphone	Full-duplex
Display	5-inch color display
Lines	5
PoE	Yes (802.3af)
Protocols	SIP, SDP, SRTP
Wi-Fi	802.11a/b/g/n/ac
Headset Jack	Yes
Codecs	G.711, G.722, G.729, iLBC
USB Port	2 x USB 2.0
USB Ports	2 x USB 2.0
Supported Languages	Multiple (English, French, Spanish, etc.)