Cisco 8861 Deployment Guide

Cisco IP Phone 8861 and 8865 Wireless LAN Deployment Guide
11
The Cisco IP Phone 8861 and 8865 are supported on the following Cisco Meraki access point platforms.
https://meraki.cisco.com/products/wireless#models
https://meraki.cisco.com/products/appliances#models
The Cisco Meraki MR12, MR16, and Z1 access point platforms are not certified for use with Cisco IP Phone 8861 and 8865
deployments.
Note: If an access point model is not specifically listed above, then it is not supported.
VoWLAN is currently not supported in conjunction with Cisco Aironet 1500 Series outdoor access points.
No support for any access point model operating in MESH mode.
No support for 3
rd
party access points as there are no interoperability tests performed for 3
rd
party access points.
However, the user should have basic functionality when connected to a Wi-Fi compliant access point.
Some of the key features are the following:
• 5 GHz (802.11a/n/ac)
• Wi-Fi Protected Access v2 (WPA2+AES)
• Wi-Fi Multimedia (WMM)

Cisco 8861 Specifications

General

Resolution	800 x 480 pixels
Audio	Wideband audio
Ethernet Ports	2 x 10/100/1000
Speakerphone	Full-duplex
Display	5-inch color display
Lines	5
PoE	Yes (802.3af)
Protocols	SIP, SDP, SRTP
Wi-Fi	802.11a/b/g/n/ac
Headset Jack	Yes
Codecs	G.711, G.722, G.729, iLBC
USB Port	2 x USB 2.0
USB Ports	2 x USB 2.0
Supported Languages	Multiple (English, French, Spanish, etc.)