Cisco 8861 Deployment Guide

Cisco IP Phone 8861 and 8865 Wireless LAN Deployment Guide
195
Cisco Unified Communications Manager Express
To install the firmware on Cisco Unified Communications Manager Express, extract the contents of the TAR file and upload
into the router’s flash. Each file will need to be enabled for TFTP download. Configure the phone load and reset the phones to
upgrade the firmware.
8861 Example:
tftp-server flash:sip88xx.11-7-1-17.loads
tftp-server flash:boot1288xx.BE-01-007.sbn
tftp-server flash:fbi88xx.BE-01-010.sbn
tftp-server flash:kern88xx.11-7-1-17.sbn
tftp-server flash:kern288xx.11-7-1-17.sbn
tftp-server flash:m0patch288xx.BE-01-001.sbn
tftp-server flash:rootfs88xx.11-7-1-17.sbn
tftp-server flash:rootfs288xx.11-7-1-17.sbn
tftp-server flash:sb288xx.BE-01-024.sbn
tftp-server flash:sb2288xx.BE-01-009.sbn
tftp-server flash:ssb288xx.BE-01-005.sbn
tftp-server flash:vc488xx.11-7-1-17.sbn
!
voice register pool-type 8861
phoneload-support
transport tcp
description Cisco SIP Phone 8861
reference-pooltype 9971
!
voice register global
load 8861 sip88xx.11-7-1-17
8865 Example:
tftp-server flash:sip8845_65.11-7-1-17.loads
tftp-server flash:fbi8845_65.BEV-01-006.sbn
tftp-server flash:kern8845_65.11-7-1-17.sbn
tftp-server flash:rootfs8845_65.11-7-1-17.sbn
tftp-server flash:sb28845_65.BEV-01-015.sbn
tftp-server flash:vc48845_65.11-7-1-17.sbn
!
voice register pool-type 8865
phoneload-support
transport tcp
description Cisco SIP Phone 8865

Cisco 8861 Specifications

General

Resolution	800 x 480 pixels
Audio	Wideband audio
Ethernet Ports	2 x 10/100/1000
Speakerphone	Full-duplex
Display	5-inch color display
Lines	5
PoE	Yes (802.3af)
Protocols	SIP, SDP, SRTP
Wi-Fi	802.11a/b/g/n/ac
Headset Jack	Yes
Codecs	G.711, G.722, G.729, iLBC
USB Port	2 x USB 2.0
USB Ports	2 x USB 2.0
Supported Languages	Multiple (English, French, Spanish, etc.)