Cisco 8861 Deployment Guide

Cisco IP Phone 8861 and 8865 Wireless LAN Deployment Guide
77
Note: Cisco Meraki access points support 802.11r (FT) for fast secure roaming, but do not support Cisco Centralized Key
Management (CCKM).
If WPA2-Enterprise is enabled where the Cisco Meraki authentication server will be utilized as the RADIUS server, then a
user account must be created on the Network-wide > Configure > Users page, which the Cisco IP Phone 8861 and 8865 will
be configured to use for 802.1x authentication.
Note: Cisco Meraki access points do not support EAP-FAST.
On the Wireless > Configure > Access control page, recommend to enable Bridge mode, where the Cisco IP Phone 8861 and
8865 will obtain DHCP from the local LAN instead of the Cisco Meraki network; unless call control, other endpoints, etc. are
cloud-based.

Cisco 8861 Specifications

General

Resolution	800 x 480 pixels
Audio	Wideband audio
Ethernet Ports	2 x 10/100/1000
Speakerphone	Full-duplex
Display	5-inch color display
Lines	5
PoE	Yes (802.3af)
Protocols	SIP, SDP, SRTP
Wi-Fi	802.11a/b/g/n/ac
Headset Jack	Yes
Codecs	G.711, G.722, G.729, iLBC
USB Port	2 x USB 2.0
USB Ports	2 x USB 2.0
Supported Languages	Multiple (English, French, Spanish, etc.)