Table 11: Y-Cable for Redundancy
DescriptionCable MarkingBundle PID
16-port cable for TDM CEM Interface Module, 42
inches cable length and 10 inches stub length, even
slot
T1/E1-Cable S-3CABLE-16TDM-R1EL1
16-port cable for TDM CEM Interface Module, 42
inches cable length and 7.5 inches stub length, even
slot
T1/E1 Cable S-2
16-port cable for TDM CEM Interface Module, 42
inches cable length and 6.5 inches stub length, even
slot
T1/E1 Cable S-1
16-port cable for TDM CEM Interface Module, 42
inches cable length and 10 inches stub length, even
slot
T1/E1-Cable M-3CABLE-16TDM-R1EL2
16-port cable for TDM CEM Interface Module, 42
inches cable length and 7.5 inches stub length, even
slot
T1/E1-Cable M-2
16-port cable for TDM CEM Interface Module, 42
inches cable length and 6.5 inches stub length, even
slot
T1/E1-Cable M-1
16-port cable for TDM CEM Interface Module, 42
inches cable length and 10 inches stub length, even
slot
T1/E1-Cable L-3CABLE-16TDM-R1EL3
16-port cable for TDM CEM Interface Module, 42
inches cable length and 7.5 inches stub length, even
slot
T1/E1-Cable L-2
16-port cable for TDM CEM Interface Module, 42
inches cable length and 6.5 inches stub length, even
slot
T1/E1-Cable L-1
16-port cable for TDM CEM Interface Module, 42
inches cable length and 10 inches stub length, even
slot
T3/E3-Cable S-3CABLE-16TDM-R3EL1
16-port cable for TDM CEM Interface Module, 42
inches cable length and 7.5 inches stub length, even
slot
T3/E3-Cable S-2
16-port cable for TDM CEM Interface Module, 42
inches cable length and 6.5 inches stub length, even
slot
T3/E3-Cable S-1
Cisco ASR 907 Router Hardware Installation Guide
111
Installing the Cisco ASR 907 Router
Patch Panel Cabling for Redundancy