Cisco ASR 907 User Manual

Description (two LEDs for eachT1/E1 port)Color/StateLED
All ports up
GreenPort
All ports up and one or more ports in a loopback stateBlinking green
One or more configured ports are downAmber
One or more configured ports are down and at least one configured port is in a
loopback state
Blinking amber
All ports disabled or shut downOff
All power rails are within supported range
GreenPWR
DisabledRed
No power on the interface moduleOff
Failed
RedSTAT
Disabled or powered downOff
BootingBlinking red
ActiveGreen
The table below summarizes the LEDs for the 32 T1/E1 interface module.
Table 39: 32 T1/E1 Interface Module LEDs
Description (two LEDs for eachT1/E1 port)Color/StateLED
ActiveGreenActive
StandbyBlinking green
Operationally down; card is disabled or shut downOff
All ports up
Solid GreenPort
All ports up and one or more ports in a loopback stateBlinking green
One or more configured ports are downSolid Amber
One or more configured ports are down and at least one configured port is in a
loopback state
Blinking amber
All ports disabled or shut downOff
Operational
GreenSTAT
BootingPulsing Green
Failure; On at resetRed
Cisco ASR 907 Router Hardware Installation Guide
188
Troubleshooting
T1/E1 Interface Module LEDs

Cisco ASR 907 Specifications

General

Brand	Cisco
Model	ASR 907
Category	Network Router
Language	English