DescriptionComponent
Check the container for the following optional equipment:
• Power cord if an AC power supply was shipped. There are no cords for the DC power supply
units.
• T1/E1 cable connector (required only for T1/E1 interface modules)
Optional equipment
Most Cisco documentation is available online. Documentation that is shipped with your Cisco ASR
907 Router includes the Regulatory Compliance and Safety Information for the Cisco ASR 900
Series Aggregation Service Router document, and the Cisco ASR 900 Series Aggregation Service
Router Documentation Roadmap that contains information about the various documents that are
available online and the links to them.
Note
Cisco ASR 907 Router Hardware Installation Guide
54
Preparing for Installation
Unpacking and Verifying the Shipped Contents