Contents
vii
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
SPA-DSP LED 3-74
1-Port Channelized OC3 STM-1 ATM CEoP SPA Overview 3-75
1-Port Channelized OC-3 ATM CEoP SPA LEDs 3-75
1-Port Channelized OC-3 ATM CEoP SPA Interface Specifications 3-76
1-Port Channelized OC-3 ATM CEoP SPA Optical Transceiver Modules and Cables 3-76
2-Port Channelized T3/E3 ATM CEoP SPA Overview 3-77
2-Port Channelized T3/E3 ATM CEoP SPA LEDs 3-77
2-Port Channelized T3/E3 ATM CEoP SPA Interface Specifications 3-78
2-Port Channelized T3/E3 ATM CEoP SPA Cables and Connectors 3-78
24-Port Channelized T1/E1/J1 ATM CEoP SPA Overview 3-79
24-Port Channelized T1/E1/J1 CEoP SPA LEDs 3-79
24-Port Channelized T1/E1/J1 CEoP SPA Interface Specifications 3-80
24-Port Channelized T1/E1/J1 CEoP SPA Cables and Connectors 3-80
Cable Installation 3-81
SPA Cable Pinouts 3-81
RJ-45 Cable Pinouts 3-84
Patch Panel Cabling 3-84
24-Port Channelized T1/E1/J1 CEoP SPA Patch Panel 3-84
CHAPTER
4 Preparing to Install a SIP or a SPA 4-1
Required Tools and Equipment 4-1
Safety Guidelines 4-1
Safety Warnings 4-1
Warning Definition 4-2
Electrical Equipment Guidelines 4-8
Telephone Wiring Guidelines 4-8
Preventing Electrostatic Discharge Damage 4-8
Laser/LED Safety 4-9
CHAPTER
5 Installing and Removing a SIP 5-1
Handling SIPs 5-1
Online Insertion and Removal 5-2
Preparing for Online Removal of a SIP 5-2
Deactivating a SIP 5-3
Reactivating a SIP 5-3
Verifying the Deactivation and Activation of a SIP 5-4
Preparing for Online Removal of a SPA 5-5
Deactivating a SPA 5-5
Reactivating a SPA 5-7
To Next Page
Loading...
