Cisco C20 Administrator's Guide

11
Cisco TelePresence System Quick Set C20 / C20 Plus and Profiles using C20 Administrator guide
D14637.04 Profile C20 and Quick Set C20 Administrator Guide TC4.0, November 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Signing in
The web interface
The web interface allows for remote administration of the
system.
Connect to the codec
Open a web browser and enter the IP address of the
codec.
How to find the IP address:
To find the IP address, open the System Information page
using the remote control. Navigate to Home > Settings >
System Information.
Password protection of the web interface
In order to access the web interface you must sign in. The
username and password are the same as defined for the
codec. The default username is admin with no password
set.
Read more about user roles and how to manage users in
the User management section, and about ways to password
protect your codec in the Password protection chapter.
1. Enter the IP address of
the codec.
2. Enter the username
and password and
press Sign In.
Contents
Contact us
Web interface
Advanced configuration
Introduction
Password protection
Appendices
Web interface

Cisco C20 Specifications

General

Encryption	AES
Frame Rate	Up to 30 fps
Firewall Traversal	Yes
Connectivity	Wired
Video Standards	H.264
Audio Standards	G.711, G.722
Network Interfaces	10/100/1000 Ethernet
Content Sharing	Yes
Product Type	Video conferencing system
Network Protocols	H.323, SIP
Interfaces	Ethernet
Video Resolution	720p