Cisco Catalyst 250 Series Configuration Guide

INDEX
A
active link 47
and routing 47
and routing protocols 47
auto mode 86
auto-MDIX 44
configuring 44
described 44
auto-MDIX, configuring 44
B
Budgeting Power 95
Example command 95
C
CDP 53, 84
defined with LLDP 53
power negotiation extensions 84
CDP with power consumption, described 84
CDP with power negotiation, described 84
Cisco intelligent power management 84
civic location 55
Configuration Examples for Configuring PoE command 95
configuring 44, 79
custom location 56
D
default configuration 57
LLDP 57
default setting 47
described 44, 47
devices supported 17, 83
E
ELIN location 55
enhanced PoE 84, 91
Ethernet management port 47, 48, 49
active link 47
and routing 47
and routing protocols 47
default setting 47
described 47
for network management 47
supported features 49
unsupported features 49
Ethernet management port configuration 50
Ethernet management port, internal 47, 49
and routing 47
and routing protocols 47
unsupported features 49
Example for Configuring Auto-MDIX command 46
Example for Configuring Layer 3 Interfaces command 40
Examples for Configuring the System MTU command 76
F
Fa0 port 47
See Ethernet management port 47
fastethernet0 port 47
See Ethernet management port 47
for network management 47
G
geo location 56
H
high-power devices operating in low-power mode 84
hub 48
Catalyst 2960-XR Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29420-01 IN-1

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English