Cisco Catalyst 250 Series Configuration Guide

PurposeCommand or Action
Specifies the network-policy TLV.lldp med-tlv-select network-policy
Example:
Switch(config-if)# lldp med-tlv-select
Step 7
network-policy
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 8
Verifies the configuration.show network-policy profile
Example:
Switch# show network-policy profile
Step 9
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Switch# copy running-config
Step 10
startup-config
Configuring Location TLV and Wired Location Service
Beginning in privileged EXEC mode, follow these steps to configure location information for an endpoint
and to apply it to an interface.
Catalyst 2960-XR Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29420-01 65
Configuring LLDP, LLDP-MED, and Wired Location Service
Configuring Location TLV and Wired Location Service

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English