Cisco Catalyst 250 Series Configuration Guide

CHAPTER 5
Configuring LLDP, LLDP-MED, and Wired
Location Service
•
Finding Feature Information, page 53
•
LLDP, LLDP-MED, and Wired Location Service Overview, page 53
•
How to Configure LLDP, LLDP-MED, and Wired Location Service, page 58
•
Configuration Examples for LLDP, LLDP-MED, and Wired Location Service, page 69
•
Monitoring and Maintaining LLDP, LLDP-MED, and Wired Location Service, page 70
•
Additional References for LLDP, LLDP-MED, and Wired Location Service, page 71
•
Feature Information for LLDP, LLDP-MED, and Wired Location Service, page 72
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
LLDP, LLDP-MED, and Wired Location Service Overview
LLDP
The Cisco Discovery Protocol (CDP) is a device discovery protocol that runs over Layer 2 (the data link layer)
on all Cisco-manufactured devices (routers, bridges, access servers, and switches). CDP allows network
management applications to automatically discover and learn about other Cisco devices connected to the
network.
Catalyst 2960-XR Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29420-01 53

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English