Cisco Catalyst 2960-X Configuration Guide

Interface Types 13
Port-Based VLANs 14
Switch Ports 14
Access Ports 14
Trunk Ports 15
Tunnel Ports 15
Routed Ports 15
Switch Virtual Interfaces 16
SVI Autostate Exclude 16
EtherChannel Port Groups 17
Power over Ethernet Ports 17
Using the Switch USB Ports 18
USB Mini-Type B Console Port 18
Console Port Change Logs 18
USB Type A Ports 19
Interface Connections 19
Interface Configuration Mode 20
Default Ethernet Interface Configuration 21
Interface Speed and Duplex Mode 22
Speed and Duplex Configuration Guidelines 22
IEEE 802.3x Flow Control 23
Layer 3 Interfaces 23
How to Configure Interface Characteristics 24
Configuring Interfaces Procedure 24
Adding a Description for an Interface 25
Configuring a Range of Interfaces 26
Configuring and Using Interface Range Macros 27
Configuring Ethernet Interfaces 29
Setting the Interface Speed and Duplex Parameters 29
Configuring IEEE 802.3x Flow Control 30
Configuring Layer 3 Interfaces 31
Configuring SVI Autostate Exclude 33
Shutting Down and Restarting the Interface 34
Configuring the Console Media Type 35
Configuring the USB Inactivity Timeout 36
Catalyst 2960-XR Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX1
iv OL-29420-01
Contents

Cisco Catalyst 2960-X Specifications

General

Console port	RJ-45
USB 2.0 ports quantity	2
SFP module slots quantity	4
Installed SFP modules quantity	-
Gigabit Ethernet (copper) ports quantity	48
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Power source	AC
Input current	5 A
AC input voltage	100 - 240 V
Power consumption (typical)	60.9 W
Number of power supply units	1
Redundant power supply (RPS) support	Yes
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 4000 m
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	-5 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Switching protocols	UDP, TCP, RADIUS/TACACS+
Number of VLANs	1023
Networking standards	IEEE 802.1ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Throughput	107.1 Mpps
Jumbo frames	9216
Number of queues	8
MAC address table	16000 entries
Number of static routes	1000
DHCP features	DHCP server
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	802.1x RADIUS, SNMP, SSH
Access Control List (ACL) rules	3
Switch type	Managed
Switch layer	L2/L3
Safety	UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1
Form factor	1U
Product color	Black
Total Power over Ethernet (PoE) budget	370 W
Power over Ethernet (PoE) ports quantity	24
Power over Ethernet plus (PoE+) ports quantity	12
Memory type	DRAM
Noise level	39 dB
Flash memory	128 MB
Internal memory	512 MB
Processor frequency	600 MHz
Mean time between failures (MTBF)	276870 h

Weight and Dimensions

Depth	368 mm
Width	445 mm
Height	45 mm
Weight	5800 g