Cisco Catalyst 2960-X Configuration Guide

Monitoring Interface Characteristics 37
Monitoring Interface Status 37
Clearing and Resetting Interfaces and Counters 38
Configuration Examples for Interface Characteristics 38
Adding a Description to an Interface: Example 38
Identifying Interfaces on a Stack-Capable Switch: Examples 39
Configuring a Range of Interfaces: Examples 39
Configuring and Using Interface Range Macros: Examples 39
Setting Interface Speed and Duplex Mode: Example 40
Configuring Layer 3 Interfaces: Example 40
Configuring the Console Media Type: Example 40
Configuring the USB Inactivity Timeout: Example 41
Additional References for the Interface Characteristics Feature 41
Feature History and Information for Configuring Interface Characteristics 42
CHAPTER 3 Configuring Auto-MDIX 43
Prerequisites for Auto-MDIX 43
Restrictions for Auto-MDIX 43
Information about Configuring Auto-MDIX 44
Auto-MDIX on an Interface 44
How to Configure Auto-MDIX 44
Configuring Auto-MDIX on an Interface 44
Monitoring Auto-MDIX 45
Example for Configuring Auto-MDIX 46
Feature History and Information for Auto-MDIX 46
CHAPTER 4 Configuring Ethernet Management Port 47
Finding Feature Information 47
Prerequisites for Ethernet Management Ports 47
Information about the Ethernet Management Port 47
Ethernet Management Port Direct Connection to a Switch 48
Ethernet Management Port Connection to Stack Switches using a Hub 48
Ethernet Management Port and Routing 48
Supported Features on the Ethernet Management Port 49
How to Configure the Ethernet Management Port 50
Catalyst 2960-XR Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29420-01 v
Contents

Cisco Catalyst 2960-X Specifications

General

Console port	RJ-45
USB 2.0 ports quantity	2
SFP module slots quantity	4
Installed SFP modules quantity	-
Gigabit Ethernet (copper) ports quantity	48
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Power source	AC
Input current	5 A
AC input voltage	100 - 240 V
Power consumption (typical)	60.9 W
Number of power supply units	1
Redundant power supply (RPS) support	Yes
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 4000 m
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	-5 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Switching protocols	UDP, TCP, RADIUS/TACACS+
Number of VLANs	1023
Networking standards	IEEE 802.1ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Throughput	107.1 Mpps
Jumbo frames	9216
Number of queues	8
MAC address table	16000 entries
Number of static routes	1000
DHCP features	DHCP server
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	802.1x RADIUS, SNMP, SSH
Access Control List (ACL) rules	3
Switch type	Managed
Switch layer	L2/L3
Safety	UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1
Form factor	1U
Product color	Black
Total Power over Ethernet (PoE) budget	370 W
Power over Ethernet (PoE) ports quantity	24
Power over Ethernet plus (PoE+) ports quantity	12
Memory type	DRAM
Noise level	39 dB
Flash memory	128 MB
Internal memory	512 MB
Processor frequency	600 MHz
Mean time between failures (MTBF)	276870 h

Weight and Dimensions

Depth	368 mm
Width	445 mm
Height	45 mm
Weight	5800 g