Cisco CCNA NETWORK SIMULATOR User Manual

© 2004 Boson Software, Inc. All Rights Reserved. 75
Norton Personal Firewall
Upon launching the Cisco CCNA Network Simulator, the Norton™ Personal Firewall
™ (if installed)
might appear with a similar window to this one:
You must select the “Always allow connections to this program on all ports” pull down option, and then
click the Ok button. This will give the program access to establish Telnet sessions. If you desire to play
with the “Manually configure Internet access” option, you must configure to permit loopback IP 127.0.0.1
on Telnet port 23.
The above third-party programs were tested only so far as basic compatibility for use with the advanced
features of the Cisco CCNA Network Simulator. No other testing was completed.

Cisco CCNA NETWORK SIMULATOR Specifications

General

Brand	Cisco
Model	CCNA NETWORK SIMULATOR
Category	Software
Language	English