Configuring VPN
Configuring VPN Passthrough
Cisco CVR100W Wireless-N VPN Router Administration Guide 113
6
The certificate for client (client.pem) will be saved to your local PC.
Configuring VPN Passthrough
VPN Passthrough allows VPN traffic that originates from VPN clients to pass
through your CVR100W.
To configure VPN passthrough:
STEP 1 Choose VPN > VPN Passthrough.
STEP 2 Choose the type of traffic to allow to pass through the CVR100W:
STEP 3 Click Save.
IPsec Passthrough Check Enable to allow IP security tunnels to pass
through the CVR100W.
PPTP Passthrough Check Enable to allow Point-to-Point Tunneling
Protocol (PPTP) tunnels to pass through the CVR100W.
L2TP Passthrough Check Enable to allow Layer 2 Tunneling Protocol
(L2TP) tunnels to pass through the CVR100W.
To Next Page
Loading...
