Configuring Wireless Network
Configuring Advanced Wireless Settings
Cisco CVR100W Wireless-N VPN Router Administration Guide 79
4
Configuring Advanced Wireless Settings
CAUTION Advanced wireless settings should be adjusted only by an expert administrator;
incorrect settings can reduce wireless performance.
To configure advanced wireless settings:
STEP 1 Choose Wireless > Advanced Settings. The Advanced Settings page appears.
STEP 2 Configure these settings:
Frame Burst Check Enable to enable this feature to provide your
wireless networks with greater performance,
depending on the manufacturer of your wireless
products. If you are not sure how to use this option,
keep the default (enabled).
WMM No
Acknowledgement
Check Enable to enable this feature. Enabling WMM No
Acknowledgement can result in more efficient
throughput, but higher error rates in a noisy Radio
Frequency (RF) environment. Default setting is
disabled.
To Next Page
Loading...
