Viewing CVR100W Status
Viewing Wireless Statistics
Cisco CVR100W Wireless-N VPN Router Administration Guide 30
2
Viewing Wireless Statistics
The Wireless Statistics page shows a cumulative total of relevant wireless
statistics for the radio on the CVR100W.
To view wireless statistics:
STEP 1 Choose Status > Wireless Statistics.
STEP 2 From the Refresh Rate drop-down menu, choose a refresh rate.
STEP 3 (Optional) By default, byte data is displayed in bytes and other numerical data is
displayed in long form. To show the bytes in kilobytes (KB) and the numerical data
in round-up form, check Show Simplified Statistic Data and click Save.
STEP 4 To reset the wireless statistics counters, click Clear Counters.
The Wireless Statistics table displays the following information:
Dropped Number of the received and sent packets that were
dropped.
Multicast Number of multicast packets sent over this radio.
Collisions Number of signal collisions that occurred on this port.
A collision occurs when the port tries to send data at
the same time as a port on another router or computer
that is connected to this port.
SSID Name Name of the wireless network.
Packet Number of received and sent wireless packets for
each SSID, and total number of received and sent
wireless packets for all SSIDs.
Byte Number of received and sent bytes of information for
each SSID, and total number of received and sent
bytes of information for all SSIDs.