Cisco CVR100W Administration Guide

Configuring Quality of Service (QoS)
Configuring Bandwidth Management
Cisco CVR100W Wireless-N VPN Router Administration Guide 115
7
STEP 4 Click Save.
Configuring Bandwidth Priority
In the Bandwidth Priority table, you can assign priorities to services to manage
the bandwidth usage.
To configure the bandwidth priorities:
STEP 1 Choose QoS > Bandwidth Management.
STEP 2 In the Bandwidth Management field, check Enable.
STEP 3 In the Bandwidth Priority table, click Add Row.
STEP 4 Enter the following information:
STEP 5 Click Save.
STEP 6 To edit the settings of an entry in the table, check the relevant box and click Edit.
When you are done making changes, click Save.
STEP 7 To delete an entry from the table, check the relevant box and click Delete. Then,
click Save.
STEP 8 To add a new service definition, click Configure Services. You can define a new
service to use for all firewall and QoS definitions. See Configuring Service
Management for more information.
Downstream The bandwidth (kbs) used for receiving data from the
Internet.
Enable Check to enable bandwidth management for this
service.
Service Name Choose the service to prioritize.
Direction Choose the direction of the traffic that you want to
prioritize (Downstream or Upstream).
Priority Choose the priority of the service (Low, Normal,
Medium, or High).

Cisco CVR100W Specifications

General

Brand	Cisco
Model	CVR100W
Category	Network Router
Language	English