Administering Your CVR100W
Running the Setup Wizard
Cisco CVR100W Wireless-N VPN Router Administration Guide 135
8
The Configure Wireless Security page opens. From this page you can set the
name for your wireless network and select the type of wireless security.
• Network Name: Enter a unique name for the wireless network.
• Security Mode: Select the type of wireless security and specify the
corresponding security settings. We recommend that you use the highest
level of security that is supported by the devices in your network. See
Configuring Wireless Security for more information on configure the
wireless security settings.
STEP 4 Click Next to continue.
The Confirm Setup Wizard Configuration page opens. From this page you can see
the summary information for all configuration.
STEP 5 If the configuration is correct, click Save and Exit to complete the configuration. If
you click Exit, the changes that you made will be lost.
NOTE The Change Password window appears if you exit the Setup Wizard without saving
any settings. See Changing the Default Administrative Password for more
information.
To Next Page
Loading...
