Using Cisco QuickVPN
Using the Cisco QuickVPN Software
Cisco CVR100W Wireless-N VPN Router Administration Guide 146
A
The window displays the IP address of the remote end of the VPN tunnel, the time
and date the VPN tunnel began, and the total length of time the VPN tunnel has
been active.
To terminate the VPN tunnel, click Disconnect.
To change your password, click Change Password. For information, click Help.
STEP 9 If you clicked Change Password and have permission to change your own
password, the Connect Virtual Private Connection window appears.
STEP 10 Enter your password in the Old Password field. Enter your new password in the
New Password field. Then enter the new password again in the Confirm New
Password field.
STEP 11 Click OK to save your new password.