Type of stream.
The D9854 has one stream only (Multi Program Transport Stream
[MPTS]).
The D9854-I has up to 16 streams. If No Output, Passthrough,
Service Channels Only, MAP Passthrough, MAP Service
Channels Only, or Full DPM Control is selected as the Output
Mode, you can configure the Multi Program Transport Stream
(MPTS). PE2 to PE16 are not applicable.
If SPTS Service Channels Only, SPTS MAP Service Channels
Only, or SPTS Full DPM Control is selected as the Output Mode,
you can configure PE1 to PE16 streams. Each PE creates its own
transport stream for the assigned service channel and ES PIDs.
To Next Page
Loading...
