Cisco IE-3000-8TC Hardware Installation Guide

2-25
Cisco IE 3000 Switch Hardware Installation Guide
OL-13017-01
Chapter 2 Switch Installation
Installing the Switch
Step 2 Push the DIN rail latches. See Figure 2-20.
Figure 2-20 Pushing the DIN Rail Latches Out
Step 3 Position the rear panel of the switch directly in front of the DIN rail, making sure that the DIN rail fits
in the space between the two latches.
201828

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes