StatusFAIL or FAIL/ID
LED
OK LED
Power supply is operating but a warning condition has occurred—possibly
one of the following conditions:
• High temperature
• High power
• Slow power supply fan
• Low voltage
• Power supply is installed in the chassis but was disconnected from
the power source.
Flashing amberOff
Power supply is installed without a connection to a power source.Flashing amber
(10 seconds)
then amber
Off
Power supply failure—possibly one of the following conditions:
• Over voltage
• Over current
• Over temperature
• Power supply fan failure
AmberOff
Cisco Nexus 9508 NX-OS Mode Switch Hardware Installation Guide
132
LEDs
LEDs
To Next Page
Loading...
